Structural LVL

PANDAFOREST Structural LVL Beams E13.2

PANDAFOREST Structural LVL Beams E13.2 beams Is A High-Strength Laminated Veneer Lumber (LVL) Engineered Wood Product. Structural Is Structural Laminated Veneer Lumber (LVL) Which Has Been Manufactured In Accordance With AS/NZS 4357 With Properties Determined In Accordance With AS/NZS 4063.2 And Therefore Complies With The Requirements For Structural Design In Accordance With AS1720.1.

PANDAFOREST Structural LVL Beams E13.2 beams main materials is Rotary Peeled Larch Veneers Firmly bonded together under high temperature and pressure by A bond adhesive Bonding.
It is an engineered wood product that’s stronger and straighter than traditional sawn timber.

Get A Quote

Anti-Skid

PERFORMANCE

Full Birch

MATERIAL

Eco-Friendly

ENVIRONMENT

Custom

DESIGN EVEYTHING

PANDAFOREST Structural LVL Beams E13.2

PANDAFOREST Structural LVL Beams E13.2 beams Used Primarily for most of the common structural arrange- ments met in construction structural Applications.

PANDAFOREST Structural LVL Beams is treated in the glue lines with a pesticide to resist termite attack to Treatment Level H2S.

PANDAFOREST Structural LVL Beams E13.2 beams Is surpasses traditional lumber for dimensional consistency and load-carrying capacity. Available In kinds Lengths And Thicknesses Including 35mm, 45mm, 63mm And 75mm And Section Depths From 90mm To 600mm.

Versatility in Application

Vans Floor

Trailers Floor

Construction Scaffolding

Stages & Terraces

Specifications

Thickness (mm)

Depth (mm)

100

120

130

140

170

190

200

240

290

300

360

400

450

√

Length Availability 3.6m, 4.2m, 4.8m, 5.4m, 6.0m, Other lengths are available by special manufacture up to 12m * Available in lengths of 6.0m only

Veneer Thickness ：Constant through the product thickness
Joints：Scarf and / or butt jointed
Moisture Content：8% – 15% (at time of despatch)
Dimensional Tolerances：Available on request
Straightness：Available on request
Density：750 kg/m³ (approximately)
Adhesive：Phenolic – AS 2754.1
Bond：A Bond – AS/NZS 2098.2
Joint Group ：JD3 – for nails, bolts and screws
Finish：Unsanded faces, sawn edges and arrised edges.
Branding：Each piece of √ LVL is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards
Storage：Store on level bearers at maximum 1800mm centres well clear of the ground, and cover to keep dry but allow ventilation
Source：Plantation timber
Condition ：H2S treated

Special dimensions available by request – there may be requirements for minimum quantity per special dimension.

Provide One-stop OEM & ODM Service

We can provide OEM orders according to your requirements and work with you to build your own structural LVL beams brand. Please contact our OEM Service Team.